Friday 17 June 2011

APPLE IPHONE 4 SPECS, REVIEWS AND FEATURES

The iPhone 4 is a touchscreen smartphone developed by Apple. It is the fourth generation of iPhone, and successor to the iPhone 3GS. It is particularly marketed for video calling (marketed by Apple as FaceTime), consumption of media such as books and periodicals, movies, music, and games, and for general web and e-mail access. It was announced on June 7, 2010, at the WWDC 2010 held at the Moscone Center, San Francisco,[6] and was released on June 24, 2010, in the United States, the United Kingdom, France, Germany and Japan.

The iPhone 4 runs Apple's iOS operating system, the same operating system as used on previous iPhones, the iPad, and the iPod Touch. It is primarily controlled by a user's fingertips on the multi-touch display, which is sensitive to fingertip contact.

The most noticeable difference between the iPhone 4 and its predecessors is the new design, which incorporates an uninsulated stainless steel frame that acts as the device's antenna. The internal components of the device are situated between two panels of chemically strengthened aluminosilicate glass.[7] It has an Apple A4 processor and 512 MB of eDRAM, twice that of its predecessor and four times that of the original iPhone. Its 3.5-inch (89 mm) LED backlit liquid crystal display with a 960×640 pixel resolution is marketed as the "Retina Display".

The latest operating system release is iOS 4.3.3 (for GSM) and 4.2.8 (for CDMA).

Prior to the official unveiling of the iPhone 4 on June 7, 2010, two prototypes were brought to the attention of the media, breaching Apple's normally secretive development process. Many of the speculations regarding technical specifications proved accurate.

The iPhone 4 features a redesigned structure, designed by Jonathan Ive. Most notably, the bulges of the back panel as well as the band between the front and back are gone and have been replaced with flattened surfaces. The redesign reflects the utilitarianism and uniformity of existing Apple products, such as the iPad and the iMac. From the side, the metal structure most resembles the original iPhone, but from the rear, the plastic evokes the iPhone 3G and 3GS. The general layout of the device remains the same. The overall dimensions of the iPhone 4 have been reduced from its predecessor. It is 4.5 inches (110 mm) high, 2.31 inches (59 mm) wide, and 0.37 inches (9.4 mm) deep, compared to the iPhone 3GS, which is 4.55 inches (116 mm) high, 2.44 inches (62 mm) wide, and 0.48 inches (12 mm) deep; making the iPhone 4 24% thinner than its predecessor, the iPhone 3GS. Steve Jobs claims that it is “the thinnest smartphone on the planet". The reduced size of the device is primarily due to the externally placed antenna.

The iPhone 4 is structured around a stainless steel frame that wraps around the edge of the phone, acting both as the primary structure for the device and as the iPhone 4's antennas. This metal band features two slits on the GSM version of the phone, one at the lower left, and one at the top (and a fake slit along the lower right, to cosmetically mirror the one at the lower left) that divide the band into two antenna sections: the left section of the band serves as the Bluetooth, Wi-Fi, and GPS antenna, and the right and lower sections of the band act as the antenna for GSM and UMTS connectivity. On the CDMA version of the phone, however, there are four slits in the metal band. Two at the top (on the left and right) and two at the bottom. This divides the metal band into four different segments, which like the GSM version of the phone, serves as different antennas for connectivity. The top portion of the band (divided by the top left and right slits) is for connecting to the CDMA network. The left portion of the metal band is for Bluetooth, Wi-Fi, and GPS just like the GSM version. The right side is not an antenna, but serves to cosmetically mirror the left side and also to create a similar look to the GSM version of the phone.

The internal components are situated between two panels of aluminosilicate glass, described by Apple as being "chemically strengthened to be 20 times stiffer and 30 times harder than plastic," theoretically allowing it to be more scratch resistant and durable than the previous models.
                             
In fall 2010, Pentalobular screws started to replace the Philips screws used in post-repair units in the US and in production units in Japan.

0 comments:

Post a Comment

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | Online Project management